Removing and installing the front seat Audi A4
1 . First of all, we move the seat forward a little and snap off the green chip (as I understand it, seat heating) so that the wire does not break later.
We snap off the locking bolt (this is not a bolt, but a clamp that can be easily removed with pliers).
2 . We unscrew the bolt (behind the seat from the side of the door) and move the plastic back.
3 . Behind on the other hand we see a stopper. There is a plug there, which is difficult to remove (to be honest, I broke it, but I carefully fixed everything with glue), and under it we unscrew the bolt with a screwdriver.
Screwdriver flat medium.
4 . Now we move the seat back and pull it out of the sliders. I pulled out through the front door. Well, be sure to vacuum, so that it was pleasant to be in the typewriter.
5 . Installation in reverse order.
Warning:
When installing, do not forget to pull out the seat belt buckle, otherwise there is nowhere to stick the belt, because of it I had to remove and adjust the seat again.
The article is missing:
- High-quality repair photos