. Flexrotor vertical take-off and landing UAV enters second phase of development
Flexrotor vertical take-off and landing UAV enters second phase of development
Flexrotor vertical take-off and landing UAV enters second phase of development

Flexrotor vertical take-off and landing UAV enters second phase of development

In an attempt to combine the vertical take-off and landing (VTOL) capabilities of a helicopter, with the speed, range and altitude capabilities of a fixed wing aircraft, tiltrotor aircraft, such as the AgustaWestland AW609 and the Bell Boeing V-22 Osprey rely on powered rotors mounted on rotating shafts or nacelles at the end of a fixed wing. But the tiltrotor design isn’t the only option for aircraft looking to get the best of both worlds. Like Aerovironment’s SkyTote, the Flexrotor is designed to transition from vertical to horizontal flight without any pivoting of its rotor.

Having been awarded a contract earlier this week by the Office of Naval Research (ONR), Aerovel Corporation will enter the next development phase for the Flexrotor, which is intended to deliver improved maritime surveillance capabilities. With the requirement that it launch from a ship, the unmanned aerial vehicle (UAV) has a wingspan of 3 m (9.84 ft) and an oversized rotor with a diameter of 1.85 m (6.07 ft).

The size of the propeller is designed to strike a balance between providing enough lift to enable the aircraft to take off vertically, while also being small enough to be efficient during horizontal flight.

Aerovel president Tad McGeer with the Flexrotor

Currently powered by a single-cylinder 28 cc two-stroke engine through a reduction gearbox, the Flexrotor takes off vertically like a helicopter from a portable fold-out rig that supports the wings. Once airborne, the tail is deployed and, once it reaches a high enough altitude, it transitions into horizontal flight by pitching over into a dive before leveling out. To transition back to vertical flight, the aircraft flies at about 70 knots (80 mph/130 km/h) before pulling up and entering a hover that allows it to descend vertically and land.

The aircraft completed its first successful transition from vertical to horizontal flight and back again in August 2011, which can be seen in the video below. This and subsequent test flights have been conducted in light winds, but Aerovel plans to gradually increase the aircraft’s operating envelope and expose it to windier conditions. The development of an upgraded propulsion system to allow the aircraft to cope with crosswinds and high winds will be the focus of the next development phase.

Aerovel is also creating an Automatic Servicing Platform from which the Flexrotor could launch, land, park and refuel with no human assistance. In addition to placement on a ship, the platform could also be used to remotely site the aircraft for launch.

“[The special ops personnel] like the idea of not exposing where they are when they need to launch and recover one,” said John Kinzer, ONR program officer for Air Vehicle Technology. “They could put it on a mountaintop somewhere and just leave it to do surveillance.”

At its maximum vertical take off weight of 19.2 kg (42.3 lb), the Flexrotor can climb at a rate of 1 m/s (197 ft/min). After making the transition to horizontal flight, the aircraft boasts a maximum level speed of 78 knots (90 mph/145 km/h) and can stay in the air for more than 40 hours to reach a maximum range of more than 3,000 km (1,865 miles).

Here's the video of the Flexrotor making its first successful transition from vertical to horizontal flight.

Aerovel Flexrotor UAV first transition - August 2011

Tags

Darren's love of technology started in primary school with a Nintendo Game & Watch Donkey Kong (still functioning) and a Commodore VIC 20 computer (no longer functioning). In high school he upgraded to a 286 PC, and he's been following Moore's law ever since. This love of technology eventually led to his current role as Global Managing Editor of New Atlas.

Most Viewed

Apollo laser takes down 200 drones unplugged 5,200 holes carved into a Peruvian mountain left by an ancient economy Toyota's tiny, barebones IKEA pickup could be its most versatile ever 19 comments

Sign in to post a comment. Please keep comments to less than 150 words. No abusive material or spam will be published.

DemonDuck May 2, 2012 04:43 AM

Interesting but not unique. http://en.wikipedia.org/wiki/Lockheed_XFVhttp://en.wikipedia.org/wiki/Convair_XFY_Pogo

Guy Macher May 2, 2012 08:22 AM Interesting, but the name is misleading. BigGoofyGuy May 2, 2012 09:47 AM

http://en.wikipedia.org/wiki/X-13_Vertijet I think this falls under the 'nothing new under the sun'. I remember something similar that was done many years ago. http://en.wikipedia.org/wiki/VTOL Here is one that is very similar but with counter-rotating propellers. http://upload.wikimedia.org/wikipedia/commons/thumb/3/31/Lockheed_XFV-1_on_ground_bw.jpg/220px-Lockheed_XFV-1_on_ground_bw.jpg

Gerard58 May 2, 2012 10:00 AM

We seem to have the technology today to be able to develop and copy the way our feather friends do, which is a control stall when they come in to land. Why not go in that direction, as it will use less fuel. Gerard

The Hoff May 2, 2012 10:32 AM

The new part is the computer flying it and the landing station which isn't a bad idea although it is the only place this thing can land so what is the advantage of this? But saying it could land in gusty conditions with those wings on it is just a dream.

Mr Stiffy May 2, 2012 01:21 PM 3000K in 40 hours. NON stop? jerryd May 2, 2012 04:52 PM

Not bad. They should have used 2 6' props with electric motors both lift more and better high speed profile. By doubling the prop swept area you get almost 2x's the lift/hp. Plus in crosswinds the props counter rotating to each other makes it a lot more managable as much of the torques, wind loads of crosswinds cancel out. Another is props on the wingtips cut wing endplate drag if the prop comes up on the outside where the prop conteracts the tip vortex. I found this out designing a WIGE and a seaplane I hope to build soon.

donwine May 2, 2012 07:58 PM

Here is something to weigh: Which is easier - to get under a 100 pound set of barbells and push up - or to put it on the floor and roll it? The amount of energy wasted on vertical lift is not worth the waste.

Saving comment.

FREE NEWSLETTER

More than 60,000 highly-engaged subscribers receive our email newsletter. Get your daily dose of extraordinary ideas!

📎📎📎📎📎📎📎📎📎📎